U-Boot 1.1.3 (Sep 24 2015 - 14:21:58) Board: Ralink APSoC DRAM: 32 MB relocate_code Pointer at: 81f68000 spi_wait_nsec: 42 spi device id: c2 20 18 c2 20 (2018c220) find flash: MX25L12805D TOTAL_FLASH_SIZE: 16 MBytes raspi_read: from:30000 len:1000 .*** Warning - bad CRC, using default environment i2s_slave init ============================================ Ralink UBoot Version: 3.6.0.0 -------------------------------------------- ASIC 5350_MP (Port5<->None) DRAM_CONF_FROM: Boot-Strapping DRAM_TYPE: SDRAM DRAM_SIZE: 256 Mbits DRAM_WIDTH: 16 bits DRAM_TOTAL_WIDTH: 16 bits TOTAL_MEMORY_SIZE: 32 MBytes Flash component: SPI Flash Date:Sep 24 2015 Time:14:21:58 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:128, ways:4, linesz:32 ,total:16384 ##### The CPU freq = 360 MHZ #### estimate memory size =32 Mbytes Please choose the operation: 0: Boot system code via Flash (default). 1: Entr boot command line interface. 2: Load Boot Loader code then write to Flash via TFTP. 3: Load backup system code then write to Flash via TFTP. 4: Load system code then write to Flash via TFTP. 5: Load system code to SDRAM via TFTP. 6: Load user1 code then write to Flash via TFTP. 7: Load user2 code then write to Flash via TFTP. choose the operation update via UDisk: a: Load boot loader then write to Flash via UDisk. b: Load backup system then write to Flash via UDisk . c: Load system kernel then write to Flash via UDisk. d: Load system code to SDRAM via UDisk. e: Load user1 code then write to Flash via UDisk. f: Load user2 code then write to Flash via UDisk. 0 0: System Boot system code via Flash. ## Booting image at bc250000 ... raspi_read: from:250000 len:40 . Image Name: Linux Kernel Image Created: 2015-09-24 6:29:29 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1387707 Bytes = 1.3 MB Load Address: 80000000 Entry Point: 80414000 raspi_read: from:250040 len:152cbb ...................... Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80414000) ... ## Giving linux memsize in MB, 32 Starting kernel ... LINUX started... THIS IS ASIC Linux version 2.6.21 (root@wiimu-virtual-machine) (gcc version 3.4.2) #1 Thu Sep 24 14:29:19 CST 2015 The CPU frequency set to 360 MHz CPU revision is: 0001964c Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Built 1 zonelists. Total pages: 8128 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock6 Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 16kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). Cache parity protection disabled cause = c0808000, status = 11000000 PID hash table entries: 128 (order: 7, 512 bytes) calculating r4koff... 0015f900(1440000) CPU frequency 360.00 MHz Using 180.000 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 28088k/32768k available (3283k kernel code, 4680k reserved, 889k data, 116k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 Time: MIPS clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered spi_user_partition_init deice id : c2 20 18 c2 20 (2018c220) MX25L12805D(c2 2018c220) (16384 Kbytes) mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 user1 00980000 - 00a00000 size 00080000 user2 00a00000 - 01000000 size 00600000 Creating 10 MTD partitions on "raspi": 0x00000000-0x01000000 : "ALL" 0x00000000-0x00030000 : "Bootloader" 0x00030000-0x00040000 : "Config" 0x00040000-0x00050000 : "Factory" 0x00050000-0x00250000 : "bkKernel" 0x00250000-0x003a2d3b : "Kernel" mtd: partition "Kernel" doesn't end on an erase block -- force read-only 0x003a2d3b-0x00980000 : "RootFS" mtd: partition "RootFS" doesn't start on an erase block boundary -- force read-only 0x00250000-0x00980000 : "Kernel_RootFS" 0x00980000-0x00a00000 : "user" 0x00a00000-0x01000000 : "user2" Load Timer Module(Wdg/Soft) RT3xxx EHCI/OHCI init. ===========check_rootfs offset=3a2cfb i=64, ret=0 ============== name:Wiimu RootfsV ih_time:0x2be53556 ih_magic:0x756d6977 ih_hcrc:0x396812bb ih_size:5132288 Bytes ih_dcrc:0x500e3b0b os=5, arch=5, type=3, comp=3 ih_ksz:0x00000000 this is not first bootup, ignore check rootfs squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher squashfs: LZMA suppport for slax.org by jro JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. fuse init (API version 7.8) io scheduler noop registered (default) Ralink gpio driver initialized Enable Ralink GDMA Controller Module GDMA IP Version=2 HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.8 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A loop: loaded (max 8 devices) rdm_major = 253 eth2 mii.o query= phy_id:0, address:1 retval:7849 Ralink APSoC Ethernet Driver Initilization. v2.1 256 rx/tx descriptors allocated, mtu = 1500! MAC_ADRH -- : 0x00007820 MAC_ADRL -- : 0x04047da2 PROC INIT OK! === pAd = c0068000, size = 635224 === <-- RTMPAllocAdapterBlock, Status=0 block2mtd: version $Revision: 1.1.1.1 $ rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1 rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000 rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2 rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). ASoC version 0.13.0 asoc: wm8918 <-> rt5350_ssc0/i2s mapping ok mv_audio: mv_audio_du240_init() called ALSA device list: #0: RT5350 (wm8918) nf_conntrack version 0.5.0 (256 buckets, 2048 max) ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller s11_board_init input: mv_gpiokey as /class/input/input0 gpio_key_Init gpio_key_mask 65801 VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 116k freed init started: BusyBox v1.12.1 (2015-09-24 14:22:57 CST) starting pid 148, tty '': '/etc_ro/rcS' Algorithmics/MIPS FPU Emulator v1.5 devpts: called with bogus options internet.sh starting pid 158, tty '/dev/ttyS1': '/bin/sh' BusyBox v1.12.1 (2015-09-24 14:22:57 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. # enter internet.sh Password for 'admin' changed ##### restore Ralink ESW to dump switch ##### switch reg write offset=14, value=5555 switch reg write offset=40, value=1001 switch reg write offset=44, value=1001 switch reg write offset=48, value=1001 switch reg write offset=4c, value=1 switch reg write offset=50, value=2001 switch reg write offset=70, value=ffffffff switch reg write offset=98, value=7f7f switch reg write offset=e4, value=7f done. RX DESC a0723000 size = 2048 <-- RTMPAllocTxRxRingMemory, Status=0 EZLink: full clear mcast data!!! f8:2d:19:69:6e:b0:dd:4a:b8:a4:86:4d:64:84:c8:5e: f8:d9:c1:fa:2a:cd:fc:8d:c0:c9:77:4a:62:d8:2f:cc: 1. Phy Mode = 9 2. Phy Mode = 9 TXALC> bInternalTxALC = 0 3. Phy Mode = 9 NICInitAsicFromEEPROM: pAd->TxPowerCtrl.bInternalTxALC = 0 MCS Set = ff 00 00 00 00 Main bssid = 00:22:6c:10:xx:xx <==== rt28xx_init, Status=0 0x1300 = 00064300 ifconfig: ioctl 0x8914 failed: Cannot assign requested address ifconfig: ioctl 0x8914 failed: Cannot assign requested address Set: phy[0].reg[0] = 3900 Set: phy[1].reg[0] = 3900 Set: phy[2].reg[0] = 3900 Set: phy[3].reg[0] = 3900 auto set envirnoment OK udhcpc (v1.12.1) started phy_tx_ring = 0x01cc4000, tx_ring = 0xa1cc4000 phy_rx_ring0 = 0x01cc5000, rx_ring0 = 0xa1cc5000 MAC_ADRH -- : 0x00007820 MAC_ADRL -- : 0x04047da2 RT305x_ESW: Link Status Changed ###INIT_SELECTING xid=573382982 Waiting for Wireless Events from interfaces... enter live.sh Sat Jan 1 00:00:05 UTC 2000 umount: can't forcibly umount /dev/mtdblock9: Invalid argument umount: can't forcibly umount /dev/mtdblock8: Invalid argument *********check the mtdblock8 writable or not*********************** killall rt2860apd 1>/dev/null 2>&1 killall -q klogd killall -q syslogd syslogd -C8 1>/dev/null 2>&1 klogd 1>/dev/null 2>&1 killall -q zebra killall -q ripd WaitWifiReady ++WaitWifiReady --ftrwa context create memory 0, mem = 0x2aaaf000 nvram_bufset [mvHardwareVersion = FTR-AW2 ] value is the same, no need to update m_USB_autoPlay=1 before encrypt:0x00 0x22 0x6C 0x10 0x1E 0xBC 0x00 0x00 after encrypt :0x98 0x1B 0x11 0x9E 0x9E 0x0F 0x7A 0x46 MAC 0x00 0x22 0x6C 0x10 0x1E 0xFFFFFFBC 0x00 0x00 UUID=981B119E9E0F7A46 nvram_bufset [mv_uuid = FF960740981B119E9E0F7A46 ] value is the same, no need to update before encrypt:0x31 0x39 0x65 0x31 0x00 0x00 0x00 0x00 after encrypt :0x58 0x59 0x1C 0x80 0x43 0x8D 0x97 0x4F StartupSetVol ++ codec_path /dev/wm8918 StartupSetVol -- ssid is FTRAudio_1EBC, restore=0 goahead set web root: /etc_ro/web webs: Listening for HTTP requests at address 10.10.10.254 Play boot done music~~~~~~~~~ ftrwa context get memory 0, mem = 0x2aaaf000 mv_ioguard ready to go at 6820 g_platform_opt.name WiimuBox g_gpio_key_indicator = 0x1 set extcodec to mute system mute 1 SOCK send: AXX+MUT+001 at 7032 initProcessor at ticks=8012 snd_pcm_poll_descriptors! save_slave_setting! snd_pcm_direct_initialize_slave end !!! setAudioParams begin at ticks=8254 setAudioParams end at ticks=8260 snd_pcm_writei first at 0 (ticks=8261) ALSA snd_pcm_write_areas (hw_avail=16384, threshold=4096) system mute 0 SOCK send: AXX+MUT+000 at 8334 set extcodec to unmute releaseProcessor at ticks=11150 ftrwa context get memory 0, mem = 0x2aaaf000 cp: cannot stat '/system/workdir/misc/totalqueue.xml': No such file or directory cp: cannot stat '/system/workdir/misc/keymap.xml': No such file or directory set extcodec to mute system mute 1 SOCK send: AXX+MUT+001 at 11260 Received SIGTERM ftrwa context get memory 0, mem = 0x2aaaf000 Invalid alarm parameter 5 Invalid alarm parameter 5 Invalid alarm parameter 5 wiimuLanguage is en_us g_region is en_us ftrwa context get memory 0, mem = 0x2aaaf000 before decrypt:0xC9 0x4C 0xB4 0x8E 0x3C 0x09 0xE8 0xDD ***********DumpWifiPerferList Start******** -----------WPS Connection ------------ ssid password AuthMode EncrypType MemoryChannel -----------Router Connection ------------ ssid xxxxxxxxx password xxxxxxxxxx AuthMode WPA2PSK EncrypType AES MemoryChannel 1 -----------Router History 0------------ 0 ssid xxxxxxxxxx 0 password xxxxxxxxxx 0 AuthMode WPA2PSK 0 EncrypType AES 0 Channel 1 -----------Router History 1------------ 1 ssid 1 password 1 AuthMode 1 EncrypType 1 Channel -----------Router History 2------------ 2 ssid 2 password 2 AuthMode 2 EncrypType 2 Channel ***********DumpWifiPerferList End******** enter udhcpc thread after decrypt :0x00 0x22 0x6C 0x00 0x00 0x00 0x00 0x00 before decrypt:0x6F 0x10 0x56 0x78 0xFD 0xFA 0x6B 0x2F after decrypt :0x00 0x22 0x6C 0xFF 0xFF 0xFF 0x00 0x00 CheckIllegal ********************************** start MAC 0x00 0x22 0x6C 0x00 0x00 0x00 0x00 0x00 end MAC 0x00 0x22 0x6C 0xFF 0xFF 0xFF 0x00 0x00 cur MAC 0x00 0x22 0x6C 0x10 0x1E 0xBC 0x00 0x00 CheckIllegal ********************************** Legal ROM dhcpd get ra0 ip address 10.10.10.254 MAC 00:22:6c:10:1e:bc enter check internet thread ifconfig eth2 hw ether 00:22:6c:10:1e:beenter stop app ezlink thread Start NTP Server ra2880stop()...Done Free TX/RX Ring Memory! ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ >>>>> scan router 467265657465 in channel 1 ScanWifiWithSSID 467265657465 channel=1 sh: /vendor/user/user.sh: not found root app fork 412 ftrwa context get memory 0, mem = 0x2aaaf000 find SSID = 467265657465, (signal: 100) 0 --> NET CONNECTING IO UnixSocketServer_recv GNOTIFY=NET_CONNECTING at 12744 SOCK send: AXX+STA+002 at 12744 IO UnixSocketServer_recv ---- SetApcliWPAConnect xxxxxx ++ auth = WPA2PSK pass = xxxxxxxx channel = 1 encry = AES ftrwa context get memory 0, mem = 0x2aaaf000 LogLevel: 1 AirName: FTRAudio_1EBC HWID_Hex(12): 00226C101EBC ftrwa context get memory 0, mem = 0x2aab0000 CNodeMan_Init at 14147 cmplayerman_client_read_thread enter loop UpnPmain LoadUUid uuid uuid:7264ec82-1dd2-11b2-93d9-d58b09717fac PlayListQueueInit ++ PlayListQueueInit -- registering '/upnp/rendertransportSCPD.xml' registering '/upnp/renderconnmgrSCPD.xml' registering '/upnp/rendercontrolSCPD.xml' registering '/upnp/PlayQueueSCPD.xml' registering '/upnp/QPlaySCPD.xml' Upnp init ++ StartMiniServerSSDP create_ssdp_sock_v4 ipAddr 10.10.10.254 StartMiniServer ++ StartMiniServer -- Upnp init -- SetApcliWPAConnect -- ScanWifiWithSSID tryCount_remain = 0 scan_ok = 1 -- Upnp init OK Ready for rendering.. SpotifyConnectInit ++ mDNS Registered service succeed ^_^ ^_^ ^_^!! name '00226C101EBC@FTRAudio_1EBC', type '_raop._tcp.', port 4515 mDNS Registered service succeed ^_^ ^_^ ^_^!! name '00226C101EBC@FTRAudio_1EBC', type '_spotify-connect._tcp', port 5356 SpotifyConnectInit -- SearchOnlinePlayList_thread LoadPlayListQueueFormFlash ++ ixmlLoadDocument /mnt/keymap.xml ixmlLoadDocument /vendor/ftrwa/RecentlyQueue.xml ixmlLoadDocument /mnt/RecentlyQueue.xml ixmlLoadDocument /vendor/ftrwa/MyFavouriteQueue.xml ixmlLoadDocument /mnt/FavouriteQueue.xml LoadPlayListQueueFormFlash no xml LoadPlayListQueueFormFlash -- *********************************************** IO UnixSocketServer_recv GNOTIFY=GET_SOURCEMODE at 17476 IO UnixSocketServer_recv ---- Rcv Wcid(1) AddBAReq Start Seq = 00000000 00:00:18.241400 ra0 ftrwa Custom driver event:connected, IP:0.0.0.0 Guard recv_buf connected, IP:0.0.0.0 at 18242+++++++ 3 --> NET UP at 18242 dhcp_apcli0 ++++ Guard recv_buf------------ udhcpc (v1.12.1) started ###INIT_SELECTING xid=1668584170 Sending select for 192.168.0.31... Lease of 192.168.0.31 obtained, lease time 86400 deleting routers route: ioctl 0x890c failed: No such process route: ioctl 0x890c failed: No such process adding dns 192.168.0.1 DHCPcheck: found bound or renew success **driver ** SSID == xxxxxxxxxx **driver ** AuthType = WPA2PSK **driver ** EncrypType = AES **driver ** PSK Key == xxxxxxxxxx getWlanChannel 1 nvram_bufset [ApCliEnable = 1 ] value is the same, no need to update Prompt+++++++ recv volume_prompt:3 at 18968 IO UnixSocketServer_recv GNOTIFY=volume_prompt_start:0:3 at 18969 system prompt 0 IO UnixSocketServer_recv ---- smplayer /system/workdir/misc/Voice-prompt/us/router_connected.mp3 85 (volume_prompt:3) IO UnixSocketServer_recv GNOTIFY=NET_CONNECTED at 18988 SOCK send: AXX+STA+001 at 18988 IO UnixSocketServer_recv ---- A01controller recv_buf NET_CONNECTED_SSID:xxxxxxx at 18989 +++++++ ************************************ huaijing g_router_ssid xxxxxx ************************************ spCmd 15 1 --> NET CONN at 18991 system mute 0 SOCK send: AXX+MUT+000 at 18996 set extcodec to unmute spCmd err = 1 A01controller recv_buf ---------------- mDNS Registered service succeed ^_^ ^_^ ^_^!! name '00226C101EBC@FTRAudio_1EBC', type '_raop._tcp.', port 4515 mDNS Registered service succeed ^_^ ^_^ ^_^!! name '00226C101EBC@FTRAudio_1EBC', type '_spotify-connect._tcp', port 5356 sync slave connect thread enter loop initProcessor at ticks=20010 snd_pcm_poll_descriptors! save_slave_setting! snd_pcm_direct_initialize_slave end !!! setAudioParams begin at ticks=20056 setAudioParams end at ticks=20062 snd_pcm_writei first at 0 (ticks=20064) ALSA snd_pcm_write_areas (hw_avail=16384, threshold=4096) process_new_connection IP changed ,reinit upnp ++ upnp_device_deinit ++ UpnpFinish ++ StopMiniServer_ssdp UpnpFinish -- upnp_device_deinit -- Upnp init ++ StartMiniServerSSDP create_ssdp_sock_v4 ipAddr 10.10.10.254 create_ssdp_sock_v4 ipAddr 192.168.0.31 StartMiniServer ++ StartMiniServer -- Upnp init -- Connecting to baidu.com (180.149.132.47:80) releaseProcessor at ticks=22070 IO UnixSocketServer_recv GNOTIFY=volume_prompt_end:0:3 at 22073 system prompt 1 IO UnixSocketServer_recv ---- Prompt---------------- set extcodec to mute system mute 1 SOCK send: AXX+MUT+001 at 22260 Upnp init OK IP changed ,reinit upnp -- multicast_accept enter loop multicast recv thread enter multicast_play_thread enter mDNS Registered service succeed ^_^ ^_^ ^_^!! name '00226C101EBC@FTRAudio_1EBC', type '_raop._tcp.', port 4515 mDNS Registered service succeed ^_^ ^_^ ^_^!! name '00226C101EBC@FTRAudio_1EBC', type '_spotify-connect._tcp', port 5356 multicast_accept begin loop sync_master_listen_thread enter sync master begin loop baidu_index.html 100% |*******************************| 81 0:00:00 ETA IO UnixSocketServer_recv GNOTIFY=INTERNET_ACCESS at 25136 SOCK send: AXX+WWW+001 at 25136 IO UnixSocketServer_recv ---- A01controller recv_buf INTERNET_ACCESS:1 at 25137 +++++++ spCmd 15 get_flash_size()=0x01000000 online update: download http://114.215.143.128:9190/files/soft/wifi_audio_v2/products.xml to /tmp/products.xml spCmd err = 1 A01controller recv_buf ---------------- Connecting to 114.215.143.128:9190 (114.215.143.128:9190) % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 products.xml 100% |*******************************| 773 0:00:00 ETA online update: ParseProducts failed get_flash_size()=0x01000000 online update: download http://114.215.143.128:8020/ftr_aw_image/products.xml to /tmp/products.xml Connecting to 114.215.143.128:8020 (114.215.143.128:8020) 100 121 100 121 0 0 211 0 --:--:-- --:--:-- --:--:-- 333 ---------------------------WMUtil_GetRegion-------------- {"ret":1,"start":-1,"end":-1,"country":"\u6cd5\u56fd","province":"","city":"","district":"","isp":"","type":"","desc":""} country \u6cd5\u56fd ---------------------------------------------------------------------- Root recv_buf RegionSet:en_us at 26261 +++++++ Root recv_buf -------------- StopMiniServer_ssdp StartMiniServerSSDP create_ssdp_sock_v4 ipAddr 10.10.10.254 create_ssdp_sock_v4 ipAddr 192.168.0.31 products.xml 100% |*******************************| 299 0:00:00 ETA NTPDATE sync offset 538013168 successful A01controller recv_buf NTPSyncOffset:538013168 at 26961 +++++++ A01controller recv_buf ---------------- A01controller recv_buf multiroom:SlaveNTPSync at 26962 +++++++ multiroom_command_to_slave cmd=8 to 0 at 26962++++++ multiroom_command_to_slave ----- A01controller recv_buf ---------------- online update: download http://114.215.143.128:8020/ftr_aw_image/20160111/product.xml to /tmp/product.xml Connecting to 114.215.143.128:8020 (114.215.143.128:8020) product.xml 100% |*******************************| 385 0:00:00 ETA online update: download http://114.215.143.128:6000/wifiaudio/upgrade/20160111/MVver to /tmp/MVver_new Connecting to 114.215.143.128:6000 (114.215.143.128:6000) MVver_new 100% |*******************************| 53 0:00:00 ETA online update: Check version, new: FTR.1.2.2016, old: FTR.1.2.2015 version(FTR.1.2.2016) is 2016 version(FTR.1.2.2015) is 2015 online update: Check version, found update Connecting to baidu.com (111.13.101.208:80) baidu_index.html 100% |*******************************| 81 0:00:00 ETA Connecting to baidu.com (123.125.114.144:80) baidu_index.html 100% |*******************************| 81 0:00:00 ETA gena_process_subscription_renewal_request Connecting to baidu.com (180.149.132.47:80) baidu_index.html 100% |*******************************| 81 0:00:00 ETA gena_process_subscription_renewal_request gena_process_subscription_renewal_request Connecting to baidu.com (123.125.114.144:80) baidu_index.html 100% |*******************************| 81 0:00:00 ETA process_new_connection gena_process_subscription_renewal_request Connecting to baidu.com (111.13.101.208:80) baidu_index.html 100% |*******************************| 81 0:00:00 ETA # echo -------gena_process_subscription_renewal_request